manualshive.com logo in svg

GARDINER TECHNOLOGY GARDTEC 590, Инструкция пользователя

Поделиться
Скачать
GARDINER TECHNOLOGY GARDTEC 590 Скачать руководство пользователя страница 3

Page 

2

GARDTEC 

590/591

User Manual

Introduction

Two types of display variation are available, LCD giving two rows of 16 character
English text and may be used on the Gardtec 591 and LED giving two 7 segment LED
digits that may be used on the Gardtec 590 & 591.
Please take time to familiarise yourself with the type of equipment fitted to your
premises as it will prove invaluable whilst using this manual.

User Code Types 

Four types of User Codes are available on the Gardtec 590/591

, 

each user code type

allows for different levels of access. In total 7 User codes may be programmed by a
Master Level User Code.

User number 1 will always be a Master Level User but the remaining 6 User Codes
may be programmed (by a Master Code) to the required level of access. These may be
changed at any time via a Master level code

The User Code levels available and the functions available for the levels are:-

1 = Set Only

Only Allows for the setting of the system.

2 = Main User

Allows Setting, Part Setting, Zone Remove (if programmed
by engineer), System Test, Unsetting, Reset after Alarm (if 
programmed by engineer).

3 = User

Allows Setting, Part Setting, Reset after Alarm (if 
programmed by engineer), Unsetting.

4 = Master

Allows Setting, Unsetting, Zone Remove (if programmed by

(User 1 always Master)

engineer), Test System, View Log, Chime On/Off, User 
Codes, Set Time/Date, Reset After Alarm (if programmed 
by engineer), Unsetting.

PR5075U.qxd  19/06/00  10:59  Page 2

Содержание GARDTEC 590





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды