23
1.MACHINE DATA
Technical specifications
Type of engine
Air cooled,2
-
stroke,
Single cylinder,gasoline engine
Engine power
0.75kW/7500 min
-
1
Idle speed
2800
-
3200/min
Speed engine max
10000 min
-
1
Displacement
26cm³
Bore
34.0mm(1.34’’)
Stroke
28.0mm(1.10’’)
Exhaust system Muffler
Carburetor
WALBRO
Spark plug
CHAMPION
Ignition system Flywheel magneto,
capacitor discharge ignition
Fuel
Mixed fuel, gasoline and oil,
30:1
Gasoline
95/98 Octane unleaded *
Oil
Universal 2-stroke engine oil
Fuel tank capacity 0.6 L
Starter system
Automatic recoil starter
Clutch
Centrifugal type
Gear case ratio
57:10
Cutter
Double reciprocating blade,
double edge
Blade length
560 mm
Teeth pitch
28 mm
Max. cutting diameter 10 mm (soft wood)
Weight
5,5/5,8 kg
Sound pressure level L
PA
86.5 dB (A) K=3dB(A)
Sound power level L
WA
106.5 dB(A)
K=2.14 dB(A)
Guarantee L
WA
109 dB (A)
Vibration emission value ah
- front handle: 4.764m/s² K = 1.5m/s
2
- rear handle: 4.956m/s² K = 1.5m/s
2
The declared vibration total value has been
measured in accordance with a standard test method and
may be used for comparing one tool with another that the
declared vibration total value may also be used in a
preliminary assessment of exposure.
A warning that the vibration emission during
actual use of the power tool can differ from the declared
total value depending on the ways in which the tool is used
and of the need to identify safety measures to protect the
operator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched
off and when it is running idle in addition to the trigger
time).
INTENDED USE
Cutting and trimming of hedges, bushes and ornamental shrubs
in the domestic sector only. All other uses are expressly
excluded.
Tools for private and hobby gardens are not suitable for use in
public facilities, parks and sport centers, along roadways, on
farms or in the forestry sector.
Package contents
After opening the carton, check for damage. Immediately notify
your retailer or the address on the warranty card of damaged or
missing parts. Use the contents list to check for missing parts:
1 Hedge trimmer
1 T-Wrench 17 x 19
1 Spanner S8-S10
1 Fuel-oil mixing bottle
1 Instruction manual
Description
Fig. 1
There are the safety decals on your hedge trimmer. Make sure
the decals are legible and that you understand and follow the
instructions on them.
1. Front handle guard
Comfortable, textured finish provides anti-slip grip for front hand.
Guard protects hand from the blades. Warning decals are
located on guard.
2. Blades
Double reciprocating blades mounted to a blade support bar.
The blades are double sided, capable of cutting on either side.
3. Blade stiffener
Attaches to top of blades and guides material being cut into
blades.
4. Spark plug
Provides spark to ignite fuel mixture.
5. Choke
The choke control lever is located on the front of the air cleaner
case. Move choke lever to "Cold start" position to close the
choke for Cold Starting. Move choke lever to "RUN" position to
open choke.
6. Primer bulb
Pumping primer bulb before starting engine draws fresh fuel
from the fuel tank priming the carburetor for starting. Pump
primer bulb until fuel is visible and flows freely in the clear fuel
tank return line. Pump bulb an additional 4 or 5 times.
7. Air cleaner
Contains replaceable filter element.
8. Recoil starter handle
Pull handle slowly until recoil starter engages, then quickly and
firmly. Do not pull rope all the way out or allow the handle to
snap back, damage to the starter will occur.
9. Fuel tank
Contains fuel and fuel filter.
10. Fuel tank cap
Covers and seals fuel tank opening.
11. Rear handle
Contains Stop switch, Throttle trigger lockout and Throttle
trigger.
12. Throttle trigger lockout
This lever must be depressed first before throttle trigger can be
activated.
