62
OPERATION
STARTING AND SWITCHING OFF
Telescopic hedge cutter
1 Connect an extension lead to the hedge cutter’s plug
.
2 Pull the extension lead through the cable restraint and fasten it to the hook
.
3 When you want to start the hedge cutter, first press the starting lock and then press the Switch
.
4
.
When you want to turn off the cutting unit, release the switch again
.
N.B.: Only use extension leads which are intended for outdoor use
.
Always hold the telescopic pole
with the left hand and the rear handle with the right hand.
Portable hedge cutter
1 Connect an extension lead to the hedge cutter’s plug
.
2 Pull the extension lead through the cable restraint and fasten it to the hook
.
3 When you want to start the equipment, take hold of the front handle with one hand and
press the switch
.
Then, take hold of the rear handle with the other hand and first press the
starting lock followed by the switch
.
4 When you want to turn the equipment off, release one of the switches again
.
5 The blade brake will immediately stop the blades
.
