GARDENTEC GTT4002, Руководство пользователя

Страница: 11 / 27

11

Tank and siphon fuels only outdoors or in well-ventilated rooms.

Do not inhale fuel fumes.

Avoid contact with eyes and skin. If contact occurs, thoroughly rinse with water.
If contact with eyes occurs, seek immediate medical attention.

Wear gloves when transferring fuel.

When fuel has come into contact with your clothes, change them immediately.
Clean your clothes before putting them back on.

Store fuel out of the reach of children.
When handled inappropriately, fuels may cause damage to the
environment:

Use caution when siphoning fuels. Fuel must never seep into the ground or the
sewage system.

Dispose of any remaining fuel in an appropriate manner. Never dispose of fuel
with regular household waste.

Fuels may be stored only for a limited time. Never buy more fuel that you plan
on consuming within the next few months.
Maintenance

Before conducting an maintenance on the device, always set the ignition switch
to [0] and pull the ignition cable plug.

Check the fuel system regularly for leaks or defective parts.

Only those maintenance and fault elimination tasks described here may be
carried out. Any other tasks must be completed by a specialist.

Only use original replacement parts. Only these replacement parts are designed
and suitable for the device. Other replacement parts will not only lead to an
invalidation of the warranty, they may also endanger you and your environment.
Device-specific safety instructions

Make sure that flammable materials or materials that may explode are kept out
of the vicinity.

The unit may not be operated without the protective mechanism fitted.

Take care when using rotating tools - keep a safe distance.

Start the motor carefully in accordance with the instructions from the
manufacturer and ensure that there is plenty of space between your feet and
the tool(s).

Ensure that all nuts, bolts and screws are tightened and the unit is in a safe
operating state.

All components of the device must be assembled correctly in order to ensure
trouble-free operation.

Before using, carry out a visual check to make sure that the tools are not worn or
damaged. In order to avoid imbalance, worn or damaged parts and fixing bolts
may only be replace in sets.