1
2
CUT-OUT FOR RECESSED INSTALLATION
FITTING INSTALLATION INSTRUCTIONS
Cut-out for 210mm Step Light is 190mm (W) x 30mm (H) x 70mm (minimum depth) to ensure
sufficient space for connector and cable behind light fitting when installed.
Separate IP67 connector by pushing
on locking tab (A) with small flat blade
screwdriver.
Cut and remove two solid tinned ends
from fitting cable.
Strip PVC insulation from fitting cable
to expose strands (A).
Cut incoming feed cable from power
supply (B).
Strip PVC insulation to expose copper
strands from incoming feed cable (B)
and exiting cable (C).
Fitting cable
Feed cable
2
