POWXG1022
EN
Copyright © 2016 VARO
P a g e
|
4
www.varo.com
CHAINSAW 45 CC
– 450 MM
POWXG1022
1 APPLIANCE
These models are intended for infrequent use by homeowners, cottagers, and campers, and
for such general applications as clearing, pruning, cutting firewood, etc. They are not intended
for prolonged use. If the intended use involves prolonged periods of operation, this may cause
circulatory problems in the user’s hands due to vibration. It is not designed for commercial use.
Read this manual carefully before using the machine, for your own safety.
Your power tool should only be passed on with these instructions.
Only use Bio degradable oil (environment-friendly) to lubricate the chain.
2 DESCRIPTION
1.
Saw chain
2.
Guide bar
3.
Spark arrester screen
4.
Chain brake lever / hand guard
5.
Front handle
6.
Starter handle
7.
Engine switch
8.
Safety trigger
9.
Rear handle / boot loop
10. Oil tank cap
11. Fuel tank cap
12. Starter cover
13. Bucking spike
14. Bar retaining nuts
15. Muffler shield
16. Air cleaner cover
17. Choke lever
18. Saw chain adjustment screw
19. Chain catcher
20. Throttle/ trigger
LOW KICKBACK SAW CHAIN
helps significantly reduce kickback, or the intensity of
kickback, due to specially designed depth gauges and guard links.
CHAIN BRAKE
is a safety feature designed to reduce the possibility of injury due to kickback
by stopping a moving saw chain in milliseconds. It is activated by the Chain Brake lever.
SPARK ARRESTER SCREEN
retains carbon and other flammable particles over 0.023
inches (0.6mm) in size from engine exhaust flow. Compliance with local, state and federal
laws and/or regulations governing the use of a spark arrester screen is th
e user’s
responsibility. See Safety Precautions for additional information.
ENGINE SWITCH
immediately stops the engine when tripped. Engine switch must be pushed
to ON position to start or restart engine.
SAFETY TRIGGER
prevents accidental acceleration of the engine. Throttle trigger cannot be
squeezed unless the safety latch is depressed.
CHAIN BRAKE LEVER / HAND GUARD
protects the operator’s left hand in the event it slips
off the front handle while saw is running.
CHAIN CATCHER
reduces the danger of injury in the event saw chain breaks or derails
during operation. The chain catcher is designed to intercept a whipping chain.
NOTE: Study your saw and be familiar with its parts.
WARNING! Beware of kickback. Hold chain saw firmly with both hands
when using. For your own safety, please read and follow the safety
precautions in this manual before attempting to operate your chain saw.
Improper use can cause serious injury.
