POWXG1022
EN
Copyright © 2016 VARO
P a g e
|
11
www.varo.com
9 FUEL AND LUBRICATION
9.1
Fuel
Use regular grade unleaded gasoline mixed with 40:1 custom 2-cycle engine oil for best
results. Use mixing ratios in section fuel mixing table below.
Warning: never use straight gasoline in your unit. This will cause
permanent engine damage and void the manufacturer’s warranty for that
product. Never use a fuel mixture that has been stored for over 90 days.
Warning: 2-cycle lubricant must be a premium grade oil for 2-cycle air
cooled engines mixed at a 40 : 1 ratio. Do not use any 2-cycle oil product
with a recommended mixing ratio of 100:1. If insufficient lubrication is the
cause of engine damage, it voids the manufacturer’s engine warranty.
9.2
Mixing fuel
Add oil to an approved fuel container followed by the gasoline to allow incoming gasoline to
mix with oil. Shake container to ensure thorough mix.
Warning: Lack of lubrication voids engine warranty. Gasoline and oil must
be mixed at 40:1
9.2.1
Fuel and lubrication symbols
9.2.2
Fuel mixing table
Gasoline
litters
1
2
3
4
5
2-cycle oil ml
25
50
75
100
125
9.2.3
Recommended fuels
Some standard petrols are enriched with oxygen-containing compounds such as alcohol or
ether to comply with regulations on clean air. The motor is designed to work well on any car
petrol, including these enriched petrols, on the condition that the above mixing ratios are
observed!
9.2.4
Filling with fuel
Clean the area around the cap of the fuel tank, and remove all wood dust and dirt.
Open the fuel tank by turning the cap anticlockwise.
Fill with fresh 2-stroke mix, DO NOT overfill.
40 : 1
