2. Pump operation
Clamp for connection
Insert the connection adaptor into the pump body tightly. Use one of the four adaptors included
according to the diameter of hose you want to use.
Connect the delivery hose to the adaptor. The hose should be fixed tightly by a clamp, with no leakage
of hose or connection.
The hose and clamp are not included in packaging.
Put the pump into
water
. Donʼt use the power cable or the delivery hose to insert the pump to the
water. Only use the handle or fix a rope to the handle. Please make sure the water is deep enough
and there is enough space around the pump so that the switching unit can move properly to ON- and
OFF-position.
Never let the pump run dry or it will be damaged.
Never run the pump with outlet closed or the pump will be damaged.
Do not fix the switching unit in ON-position, otherwise it is not secured against running dry and will get
damaged.
EH 06/2008 (01)
PLEASE READ ALL INSTRUCTIONS BEFORE USING THE PUMP
Quick Guide GLSP 1002:Layout 1 24.06.2008 8:30 Uhr Seite 2
