Gardenline GLLS 3002 UK, Руководство пользователя, Страница: 12 / 31

Safety
12
Power tool use and care
a)
Do not overload the power tool. Use the correct power tool for
your application. The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and
off. Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source and/or remove the
rechargeable battery from the power tool before making any
adjustments, changing insertion tools or storing the power tool.
Such preventive safety measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of children. Do not let any
individual who is not familiar with the power tool or who has not
read these instructions operate this power tool. Power tools are
dangerous in the hands of untrained users.
e)
Maintain power tools and insertion tools with care. Check for
misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool’s operation. If
any parts of the power tool are damaged, have them repaired before
use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier to
control.
g)
Use the power tool and insertion tools, etc., in accordance with
these instructions. taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
h) Keep handles and handle surfaces dry, clean and free from oil
and grease. Slippery handles and handle surfaces will prevent you
from operating and controlling the power tools safely in unforeseen
situations.
Service
a)
Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.