Gardenline GLHT600, Руководство пользователя

Страница: 23 / 32

22
2. Move the cutting device lightly through the surface to be cut in
a sweeping motion following the shape of the hedge or shrub.
3. A slight tilt downwards of the cutting device in the direction of
motion is recommended for optimum cutting performance.
4. Do not to rush and do not attempt to cut too much with one
stroke of the cutting device.
5. First cut both sides from the bottom cutting upwards to the
top. This will prevent any of the trimmings falling into the path
of the area still to be cut (Fig. 8).
6. After cutting the sides proceed to the top (Fig. 9). Try to keep
the cutting device angled at approximately 15° to the cutting
surface.
7. Cut in a number of stages if the area being cut is particularly
long to achieve a better result; smaller trimmings will allow for
easy composting.
Fig 8 Fig 9
k www.coreservice.co.u
AFTER SALES SUPPORT
IRE GB
01904 727501
019022605
MODEL: GLHT600, 08/2015, 65531