Gardenline GLH 692, Руководство пользователя

Страница: 16 / 23

Operation
16
5. Hold the guide handle securely and press the switch in the process.
6. Grasp the handle with your other hand and also press the switch. Attention: The
hedge trimmer starts (see Fig. C ).
The transparent hand guard
3
protects the hand from branches and twigs while
cutting.
7. The hedge trimmer stops as soon as you release one of the switches.
8. Every time you take a break, place the protective cap on the blade until it engages
to prevent injuries.
Cutting
WARNING!
Risk of electric shock and injury!
If you damage or sever the extension cord of the hedge trimmer, it
will short-circuit, and there may even be a bang and a few sparks. If
the extension cord is damaged or cut through, it can cause electric
shock and serious or life-threatening injury.
− Do not be frightened! Keep hold of the hedge trimmer but
release the switch on the handle.
− Wait until the double cutter comes to a standstill.
− Do not touch the extension cord or blade! Put the hedge
trimmer down and immediately disconnect the mains plug
from the mains socket.
− Never repair a damaged extension cord. Either replace it or
have it replaced by a specialist.
− In addition to using the hedge trimmer for trimming hedges, you can also cut
shrubs and bushes.
− To achieve the best possible cutting performance, hold the hedge trimmer so that
the blade with double cutter is at an angle of approx. 15° to the hedge
(see
Fig. E
).
− Thanks to the counter-rotating cutters that cut on both sides, you can cut in both
directions.
− Cut the sides of a hedge with arch-shaped movements from the bottom to the
top (see
Fig. F
).