9
USA
1855 965 5310
AFTER SALES SUPPORT
10
USA
1855 965 5310
AFTER SALES SUPPORT
2 Person Swing
Assembly Instructions
Assembly Instructions
2 Person Swing
USA
USA
L
FIG.9
T
K
C
L
FIG.10
STEP 10: If the canopy is not tighten after assembled, please stick the velcro,
tighten it and glue again until you feel Satisfaction.
Now please enjoy your new 2 person swing.
Velcro
STEP 9:
Screw Knob (T) from outside through the gear hole on the Canopy Frame
(K) and into the gear hole on the Top Cross Bar (C). Repeat this step with the
second knob on the other Side.See Fig.8. Don’t tighten completely. You can
change the tilt of the canopy by adjusting the knobs. Make sure that all of the
bolts are securely tighten. Place the Seat Cushion (L) on the seat.
Q
STEP 7: Connect the Canopy Frame Bar (I) and the Canopy Frame (K) with
Bolt (M), Washer (V) and Bolt Cap (Y) as shown in Fig.7.
K
Y
M
V
I
V
M Y
STEP 8: Put the Canopy Cloth(Q) on the assembled instruction by Step 7.
Then you can stick the velcro as shown in Fig.8.
Q
Caution:
The hole above the Canopy
Cloth(K) must aligned with the hole on
Canopy Frame (K).
Velcro
