14
AFTER SALES SUPPORT
1800 599 8898
MODEL: 22096-20 PRODUCT CODE: 44964 04/2020
AFTER SALES SUPPORT
15
1800 599 8898
MODEL: 22096-20 PRODUCT CODE: 44964 04/2020
USA
USA
USA
USA
EE
E
E
E
E
E
E
E
E
E
E
E
Fig. 11
STEP 7:
Place all five assembled Canopy Supports (E) across the top of the frame
so that they are resting against Crossbeams (C & D). For a consistent
look, place Canopy Supports (E) on the pergola frame so that the
head of bolts used to hold these parts together are all facing in the
same direction. Insert two Bolts M6x65mm (EE) through both ends
of assembled Canopy Supports (E) and into Crossbeams (C & D); see
Figure 11. Finish assembly by tightening all screws left loose through
the construction process.
Assembly Instructions
*Complete assembly by securely tightening all screws after
placing Canopy Supports (E) over pergola frame.
EE
(10) M6X65 mm Screw
G
1
N
N
G
1
G
2
G
2
Fig. 14
Fig. 13
Fig. 12
STEP 8:
Place Canopy (N) over Canopy Supports (E). Pull Canopy (N) between
Canopy Guide Bar (F) and assembled Crossbeams (B) at either end
of pergola frame. Please note that the canopy tags should be facing
inward once this step is complete.
Insert Canopy Weight Bar (G
1
) through sleeves found at either end
of Canopy (N); see Figure 12. Insert Canopy Weight Bar (G
2
) through
opposite side of sleeves found at ends of Canopy (N); see Figure 13.
Insert end of Canopy Weight Bar (G
2
) into the end of Canopy Weight
Bar (G
1
), so that they lock in place; see Figure 14. Please note that the
latches to these two parts should be facing outward.
Assembly Instructions
*Parts G1 and G2 are not stiff when connected. They’re meant be
flexible, so they have room to give.
EE
(8) M6X65 mm Screw
