background image

4

Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use the tool while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating power tools may result in
serious personal injury.

Use personal protective equipment. Always wear eye protection. Safety equipment

such as a dust mask, non-slip safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in the off- position before

connecting to the power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools that
have the switch on invites accidents.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and

gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught
in moving parts.

Remove adjusting keys or spanners before turning the tool on. A spanner or a key

that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables better

control of the power tool in unexpected situations.

Only use safety equipment that has been approved by an appropriate standards

agency. Unapproved safety equipment may not provide adequate protection.

Power tool use and care

Do not force tools. Use the correct tool for your application. The correct tool will do

the job better and safer at the rate for which it is designed.

Do not use a power tool if the switch does not turn it on or off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or the battery pack from the power

tool before making any adjustments, changing accessories, or storing the tool. Such
preventive safety measures reduce risk of starting the tool accidentally.

Store idle power tools out of the reach of children and other untrained persons.

Power tools are dangerous in the hands of untrained users.

Maintain tools with care. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool's operation.

Содержание FH-6918S















Отзывы: