GardenJoy FH-6918S, Инструкция по эксплуатации

Страница: 12 / 14

12
How to install the drill bit?
Step 1: One hand stuck on the middle ring (point B), and the other
hand rotate the chuck (point A) anticlockwise to open the chuck jaws.
Step 2: Place the driver/drill bit in the chuck as far as it will go.
Step 3: Then rotate the chuck (point A) clockwise by hand to tighten
the chuck jaws.
Do it in reverse to remove the drill bit.
Note: To protect the top of
the chuck, the chuck was
not stick out.
Note: Please put the drill bit
in the center of the chuck,
otherwise the drill bit will
shake during use.