background image

5. 

Slide the TIE DOWN SYSTEMS into the 

slots on each POLE. 

NOTE: 

If you prefer, 

the TIE DOWNS can be added to the upper 
POLES during Step 7. Secure the ends of 
the TIE DOWNS to prevent your PLANTER 
from tipping over in high winds. 

TIE DOWN 
SYSTEM

POLE

7. 

Slide the POLE CONNECTORS into 

the tops of the POLES you inserted in 
Step 2, then slide two POLES over the 
CONNECTORS. Repeat to attach the 
remaining POLE CONNECTORS and POLES 
and place the CAPS on top.

CAP (hole 
positioned 
towards 
outside of 
planter)

POLE 
CONNECTOR

POLES

POLES 
FROM 
STEP 2

TOP TRELLIS PANEL

BOTTOM TRELLIS PANEL

TRELLIS

HOOK & LOOP 
STRIP

POLE

water fill holes

CONNECTING CLIPS

6. 

Mix 1 cup of fertilizer into 40 quarts of 

potting mix and pre-moisten. Fill your 
PLANTER to within 1" to 2" of the top 
edge. 

NOTE:

 We recommend our Organic 

Self-Watering Potting Mix, as well as a 
slow-release granular fertilizer, such as our 
All Purpose Fertilizer.  

Planting, Watering, and Care Tips

•    Fill the reservoir through the water fill holes (shown in Step 5). Check your soil 

moisture regularly and fill as needed. This is especially important when your 
plant starts to flower and set fruit. If the soil dries out, refill the reservoir and 
water thoroughly from above to re-establish the wicking action. If you overfill the 
reservoir, excess water will drain out through the side vents.

•    If you do need to move your PLANTER, use two people to lift it by the base of the 

PLANTER. Do not try to lift it by the BASKET or supports.

•    We recommend adding 1 cup of fertilizer every 4-6 weeks. Gently rake the fertilizer 

into the soil and then top-water to help disperse it. 

•    In hot zones, place the planter in a spot that gets afternoon shade.

9. 

Slide the hooked ends on the TOP 

TRELLIS PANEL into the holes on the 
CAPS. 

CAP

TRELLIS TOP PANEL

8. 

Attach the bottom of the TOP TRELLIS 

PANEL to the BOTTOM TRELLIS PANEL 
using the CONNECTING CLIPS.

10. 

Secure the TRELLIS PANELS to the 

POLES using the HOOK & LOOP STRIPS.

4. 

Place the GROW BAG into the PLANTER. 

GROW BAG

straight sides of the GROW 
BAG should be placed here

Отзывы: