ATTACHING THE TOOLS TO THE DRIVE SHAFT ASSEMBLY
•
Rest the power unit/shaft assembly on a flat firm surface.
•
Ensure that the clamping wing nut (2) is loose, pull out locator
•
Carefully fit attachment drive shaft assembly (5) into coupler (3).
•
After the attachment drive shaft is in the coupler, release the locator pin (1).
•
Turn the attachment drive shaft until the locator pin engages with the locating hole (4) in the dr
this has happened it will not be possible to twist the drive shaft.
•
Secure the drive shaft by tightening the clamping wing nut (2).
TRANSPORTATION
•
Never transport the multi-tool with the engine running. An engine that's
running could be accidently accelerated causing the chain to rotate.
•
Make sure the scabbard is in place when transporting the pruner.
•
When carrying by hand, the bar ch
2 1
ATTACHING THE TOOLS TO THE DRIVE SHAFT ASSEMBLY
Rest the power unit/shaft assembly on a flat firm surface.
Ensure that the clamping wing nut (2) is loose, pull out locator pin (1).
Carefully fit attachment drive shaft assembly (5) into coupler (3).
After the attachment drive shaft is in the coupler, release the locator pin (1).
Turn the attachment drive shaft until the locator pin engages with the locating hole (4) in the dr
this has happened it will not be possible to twist the drive shaft.
Secure the drive shaft by tightening the clamping wing nut (2).
tool with the engine running. An engine that's
running could be accidently accelerated causing the chain to rotate.
Make sure the scabbard is in place when transporting the pruner.
When carrying by hand, the bar chain should be pointing backward.
1
5 4
Turn the attachment drive shaft until the locator pin engages with the locating hole (4) in the drive shaft, when
3
