19
Continuing to use the product in the anti-freeze mode even when temperatures
have risen and returned to normal, may result in the engine failing to start properly
or in the engine failing to operate at its normal speed, and for this reason you
should always be sure to return the unit to the normal operating mode if there is no
danger of icing occurring.
HOW TO SWITCH BETWEEN OPERATING MODES
(1) Cylinder cover
(2) Choke knob
(3) Icing cap
1. Flip the engine switch to turn off
the engine.
2. Remove the cover to the air filter,
remove the air filter, and then
remove the choke knob from the
cylinder cover.
3. Loosen the screws holding the cylinder cover in place (i.e., the three screws on
the inside and the one screw on the outside of the cover), and then remove the
cylinder cover.
4. Press with your finger down on the icing cap located on the right-hand side of
the cylinder cover to remove the icing cap.
5. Adjust the icing cap so that the “snow” mark faces upwards and then return it to
its original position in the cylinder cover.
6. Fix the cylinder cover back into its original position, and then fix all other parts
back into their proper positions.
■
Stopping engine
1. Release the throttle lever to allow the engine
idling for a few minutes.
2. Set the switch to the “O” (STOP) position.
(1) Engine switch
7.
Sawing
Before proceeding to your job, read "For
