5
(b).
The port to refuel the chain oil
Position: near the oil cap
(c).
Operate the engine switch
Flipping the switch to the "O" position, immediately
the engine stops.
Position: rear at the left side of the rear handle
(d).
Operate the choke knob
Pull out the choke knob, close
the choke knob, open the choke.
Position: rear at the right side of the rear handle.
(e).
Adjust the oil pump
If you turn the rod by screwdriver follow the arrow
to the "MAX" position, the chain oil flow more, and
if you turn to the "MIN" position, less.
Position: Bottom of the power unit
2. Symbols on the machine
(f).
The screw under the "H" stamp is The
High-speed adjustment screw.
The screw under the "L" stamp is The Slow
adjustment screw.
The screw up the "T" stamp is the Idle adjustment
screw.
Position: upper-left of the rear handle
(g). Shows the directions that the chain brake is
released (white arrow) and activated (black arrow).
Position: Front of the chain cover
(h).
Shows the direction of the saw chain
installation. Position: Front of the chain cover
The port to refuel the chain oil
Flipping the switch to the "O" position, immediately
rear at the left side of the rear handle
the choke; push in
the choke.
rear at the right side of the rear handle.
the rod by screwdriver follow the arrow
to the "MAX" position, the chain oil flow more, and
if you turn to the "MIN" position, less.
Bottom of the power unit
screw under the "H" stamp is The
The screw under the "L" stamp is The Slow-speed
the "T" stamp is the Idle adjustment
left of the rear handle
that the chain brake is
released (white arrow) and activated (black arrow).
Position: Front of the chain cover
Shows the direction of the saw chain
osition: Front of the chain cover
