Gardena SILENO+ R160Li Скачать руководство пользователя страница 28

Страница: 28 / 52

4 Operation

4.1 Main switch

WARNING: Read the safety

instructions carefully before you start

the product.

WARNING: Keep your hands and feet

away from the rotating blades. Never

put your hands or feet close to or

under the product when the motor is

running.

WARNING: Do not use the product

when persons, especially children, or

animals, are in the work area.

•

Set the Main switch in the

1 position to start

the product.

•

Set the Main switch in the

0 position when

the product is not in use or before any work,

inspection or maintenance is being carried

out.
When the Main switch is set in the

0 position

the motors on the product cannot start.

4.2 Start

1. Press the STOP button to open the hatch.
2. Set the main switch to position

3. Enter the PIN code.
4. Press the START button.

5. Select the desired operating mode. Refer to

Operating mode - Start on page 28.

6. Close the hatch within 10 seconds.

If the product is parked in the charging

station, it will only leave the charging station

when the battery is fully charged and if the

timer is set to allow the product to operate.

Note: Always press the START button before

closing the hatch to start the product.

4.3 Operating mode - Start

When the START button has been pressed the

following operation selections can be selected.
•

Main area

•

Secondary area

•

Override timer

•

Spot cutting

4.3.1 Main area

Main area is the standard operating mode where

the product mows and charges automatically.

4.3.2 Secondary area

In the

Secondary area mode, the product mows

until the battery is empty.
If the product charges in the

Secondary area

mode, it will fully charge, drive out about 50 cm /

28 - Operation

1025 - 001 - 23.01.2019

Содержание SILENO+ R160Li





















































Результаты поиска

Содержание SILENO+ R160Li

Отзывы:

Похожие инструкции для SILENO+ R160Li

Бренды по названию

Популярные бренды

Gardena SILENO+ R160Li, Руководство оператора

Результаты поиска

Содержание SILENO+ R160Li

Отзывы:

Похожие инструкции для SILENO+ R160Li

Бренды по названию

Популярные бренды