Gardena R40Li, Быстрое руководство, Страница: 31 / 290

English - 23
3. INSTALLATION
Slopes
The boundary wire can be laid across a slope that
slants less than 10 %.
The boundary wire should not be laid across a slope
that is steeper than 10 %. There is a risk of R40Li
finding it difficult to turn there. The mower will then
stop and show the fault message
Outside working
area
. The risk is at its greatest in damp weather
conditions, as the wheels can slip on the wet grass.
However, the boundary wire can be laid across a
slope steeper than 10 % when there is an obstacle
that R40Li can be permitted to collide with, for
example, a fence or a dense hedge.
R40Li can mow areas inside
the working area that slope up
to 25 cm per distance metre
(25 %). Areas that slope more
must be demarcated by the
boundary wire.
When any part of the working
area's boundary slopes more
than 10 cm per distance
metre (10 %), the boundary
wire must be routed about
20 cm in on flat ground before
the slope starts.
2