Gardena PowerMax 37/36V P4A, Руководство оператора

Страница: 7 / 13

v
Do not disassemble the product further than the delivery status.
v
Use gloves, wear slip resistant shoes and wear eye protection.
v
Only start the mower with an upright standed handle.
v
Do not overload the mower.
v
Never operate the product when you are tired, ill or under the influence of
alcohol, drugs, or medicine.
2. ASSEMBLY
DANGER!
Cutting injury due to the blade!
Risk of cut injury due to accidental starting.
v
Use gloves.
v
Wait for the blade to stop.
v
Remove the safety key.
2.1 To assemble the handlebar [ Fig. A1 ]:
1. Fold both levers
(S)
outwards.
2. Turn both handlebar holders (2) to the operating position.
3. Push both levers (S) to the handlebar (1) .
4. Unscrew the two pre-assembled screws
(3)
from the handlebar
holders
(2)
.
5. Push the handlebar
(1)
into the handlebar holders
(2)
.
Make sure that the handlebar is completely in place and the holes of
the handlebar are inline up with the holes of the handlebar holders.
6. Put both screws
(3)
in the holes of the openings
(2)
in the mower.
7. Tighten both screws
(3)
with a screwdriver.
Make sure that the screws are completely tightened.
2.2 To attach the cable to the handlebar [ Fig. A2 ]:
v
Attach the cable (4) to the clamps (5) on the handlebar (1) .
Make sure that the cable is not trapped between the handlebar and
the mower, otherwise the cable may be damaged.
2.3 To assemble the grass catcher bag [ Fig. A3 ]:
1. First Push the tongue
(6)
into the two connectors
(7)
at the bottom of
the grass catcher bag (8) until the connections audibly engages.
Make sure that both connectors are engaged.
2. Then Push the tongue (6) into the connector (9) on the side of the grass
catcher bag (8) until the connection audibly engages.
Make sure that the connector is engaged.
3. First push the catcher bag handle (10) at the back into the catcher bag
cover (11) .
4. Then push the catcher bag handle (10) at the front into the catcher bag
cover (11) until the connections audibly engages.
Make sure that all connectors are engaged.
3. OPERATION
DANGER!
Cutting injury due to the blade!
Risk of cut injury due to accidental starting.
v
Use gloves.
v
Wait for the blade to stop.
v
Remove the safety key.
3.1 To charge the battery [ Fig. O1 / O2 / O3 ]:
CAUTION!
The voltage of the power source must match the voltage specified on
the rating plate of the charger.
v
Note the mains voltage.
For the GARDENA Battery Mower Art. 14638-55 there is no battery
and no charger in the scope of delivery.
Thanks to the intelligent charging process, the charge condition of the
battery is automatically detected and then charged up with the optimal
charge current depending on battery temperature and voltage.
In this way, the battery is treated with care and remains permanently fully
charged when it is stored in the charger.
1. Open the batterie cover
(18) .
2. Push the locking button
(A)
and remove the battery
(B)
from the battery
holder
(D)
.
3. Connect the battery charger
(C)
into a mains socket.
4. Slide the battery (B) onto the battery charger (C) .
When the battery charge indicator
(Lc)
at the charger blinks green
the battery is being charged.
When the battery charge indicator
(Lc)
at the charger lights per-
manently green the battery is completely charged
(Charging time, see 7. TECHNICAL DATA).
5. Examine the charge status regularly while you charge.
6. When the battery
(B) is completely charged, the battery (B) can be
disconnected from the charger (C) .
3.2 Meaning of the indication elements:
3.2.1 Indication on the charger [ Fig. O3 ]:
(Fast) Blinking of the
Green Battery Charge
Indicator (Lc)
The rapid-charging procedure is indicated by
fast blinking
of the
green
battery charge indicator
(Lc)
.
Note: The rapid-charging procedure is only possible when the battery
temperature is within the allowable charging temperature range,
see 7. TECHNICAL DATA.
(Slow) Blinking of the
Green Battery Charge
Indicator
(Lc)
When the charging condition of the battery is 80 %, the green battery
charge indicator
(Lc)
blinks slowly .
The battery can be removed for immediate use.
Continuous Lighting
of the Green Battery
Charge Indicator (Lc)
Full
Continuous lighting of the green battery charge indicator
(Lc)
indicates
that the battery is fully charged.
When the battery is not inserted,
continuous lighting of the battery
charge indicator
(Lc)
indicates that the mains plug is inserted in the
socket outlet and that the battery charger is ready for operation.
Continuous Lighting
of the Red Battery
Error Indicator (Wc)
Continuous lighting of the red battery error indicator
(Wc)
indicates
that the temperature of the battery is not within the allowable charging
temperature range, see 7. TECHNICAL DATA.
As soon as the allowable charging temperature range is reached, the
battery charger automatically switches to rapid charging.
Blinking Red Battery
Charge Indicator (Wc)
A blinking red battery error indicator
(Wc)
indicates a different malfunction
of the charging procedure, see 6. TROUBLESHOOTING.
3.2.2 Battery charge status indication (P) on the product
[ Fig. O4 / O8 ]:
After starting the product, the battery charge status indication
(P)
is displayed for 5 seconds.
Battery charge status indication Battery charge status
(L1)
,
(L2)
and
(L3)
light green 67 – 100 % charged
(L1) and (L2) light green 34 – 66 % charged
(L1)
lights green 11 – 33 % charged
(L1)
blinks green 0 – 10 % charged
If the LED (L1) blinks green, the battery must be charged.
If the error LED
(Wp)
is lighting or blinking see 6. TROUBLESHOOTING.
3.2.3 Eco button:
The Eco mode reduces the motor speed to 3100 rpm for a maximum
battery lifetime.
3.2.3.1 To activate the Eco mode:
v
Push the Eco button
(e)
on the control panel.
The Eco mode is activated and the LED
(Le)
lights.
3.2.3.2 To deactivate the Eco mode:
v
Push the Eco button
(e)
on the control panel.
The Eco mode is deactivated and the LED (Le) is off.
en
13