3. Assembly
1. Insert the short screw
z
1a
(45 mm) from the top through the
upper part of the upright
2
. Insert the long screw
z
1b
(55 mm)
from below through the upper part of the upright
2
and the
lower part
4
.
2. Screw the wing nuts
3
onto the screws
z
1a
/
z
1b
.
3. Push the lower parts of the upright
4
together gently until
they click into the bolts
5
on the upright supports
6
.
4. Insert the hexagonal screws
7
(12 mm) through the upright
supports
6
and the lower part of the upright
4
.
5. Screw the 4 nuts
8
onto the bolts
5
and hexagonal screws
7
(e.g. with
2 SW 10 mm open ended
spanners).
6. Undo the retaining screws
9
and insert one at the highest
cut level and the other at
the lowest cut level without
screwing them up tight.
7. Insert the roller
0
diagonally
into the roller supports
A
.
8. Adjust both retaining screws
9
to the same height.
3
GB
Checks before each operation :
Before use, an inspection is always to be
performed In order to determine that all
nuts, bolts and working tools are not worn
down or damaged.
Worn down or damaged blades are to be
replaced in sets.
Inspect the surface on which the lawn mower
is to be used beforehand. Stones, pieces of
wood and wires as well as other solid matter
must be removed.
Objects, which are contacted by the cutting
tools, could be thrown out uncontrollably or
damage the cutting mechanism.
Proper use / Responsibility :
DANGER !
Take note that the rotating blade
cylinder could cause injuries.
V
Never place your hands or
feet on or under moving
parts.
Do not use the lawnmower while people,
especially children or animals, are directly
nearby.
The operator is liable for damages.
The safety distance between the blade
cylinder and the operator that is created
by the guiding spar is to be always main-
tained.
When mowing embankments and slopes,
special care must be taken:
Make sure you always keep a safe distance
and wear shoes with a nonslip sole and long
trousers.
Always cut diagonally to the slope.
v
Do not mow on excessively steep
gradients.
Take special care when moving backwards
and when pulling the lawn mower. Danger
of stumbling !
Should you hit an obstruction when working,
remove the obstruction, check the mower for
any damage and have it repaired if necessary.
v
Only work when visibility is good.
Never leave the lawnmower unattended.
If your work is interrupted, store the mower
in a safe place.
7 6
9
0
A
9
6
A
7
5
5
2
4
4
8
z
1b
z
1a
3
