Gardena EasyCut 450, Руководство по эксплуатации

Страница: 9 / 14

18
GB
Fault Possible cause Remedy
The Turbotrimmer Filament worn or too short.
v
Lengthen the filament –
no longer cuts see 4. Operation “Filament
feed (Tip mechanism for
automatic filament feed )”.
Filament cassette empty.
v
Replace the filament cassette
– see 6. Maintenance
“Replacing the filament
cassette” ).
Filament drawn into the
v
Pull the filament out of the
cassette or stuck together. filament cassette (see above).
A
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
authorised by GARDENA.
8. Accessories
GARDENA Replacement Art. No. 5307
Filament Cassette
GARDENA for EasyCut 400 Art. No. 5310
Additional wheel
9. Technical Data
Turbotrimmer EasyCut ComfortCut PowerCut
(Art. 8846) (Art. 8847) (Art. 8848)
Motor power consumption 400 W 450 W 500 W
Mains voltage / 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz
mains frequency
Filament thickness 1.6 mm 1.6 mm 1.6 mm
Cutting width 250 mm 250 mm 270 mm
Filament supply 6 m 6 m 6 m
Filament feed Tip mechanism Tip mechanism Tip mechanism
Weight approx. approx. approx.
2.4 kg
2.8 kg 3.0 kg
Rpm of filament cassette approx. approx. approx.
12,700 rpm
12,700 rpm 12,300 rpm
Work area related emission 85 dB (A) 85 dB (A) 85 dB (A)
characteristic value L
pA
1)
Noise level L
WA
2) measured 95 dB (A) measured 95 dB (A) measured 95 dB (A)
guaranteed 96 dB (A) guaranteed 96 dB (A) guaranteed 96 dB (A)
Hand / arm vibration a
vhw
1) < 2.5 m / s 2 < 2.5 m / s 2 < 2.5 m / s 2
Measuring method according to 1) EN 786 2) directive 2000 /14 / EC