3. If necessary clean the transmission chamber and
lubricate the excentric drive
q
with some acid-free
grease (Vaseline).
4. Turn the excentric drive
q
downwards.
5. Pull the crank
w
on the back side of the blade
2
downwards.
6. Slide the ring
e
in the middle of the crank
w
.
7. Place the new blade
2
on the motor unit in such a way
that the excentric drive
q
is inserted in the ring
e
of the
crank
w
.
8. Slide the lid
0
upwards until it makes a click.
Problem
Possible Cause
Remedy
The jack flashes red
while charging
Allowed battery temperature
was exceeded.
v
Let the battery cool down.
Restart the charging.
Runtime too low
Blade soiled.
v
Clean and lubricate scissor blade
in accordance with the maintenance
instructions.
Product does not cut cleanly
Blade blunt or damaged.
v
Change the blade
(see
To change the blade
).
NOTE:
For any other malfunctions please contact the GARDENA service department. Repairs must only be done by GARDENA
service departments or specialist dealers approved by GARDENA.
27
EN
