Gardena 9852-33, Руководство оператора, Страница: 16 / 218

4. MAINTENANCE
DANGER! Risk of injury!
Cut injury when the product starts
accidentally.
v
Slide the protective cover
(1)
over the blade
(2)
before you do maintenance [ Fig. M1 ].
To clean the Shear:
DANGER! ELECTRIC SHOCK!
Risk of injury and risk of damage to the
product.
v
Do not clean the product with water or with
a water jet (in particular high-pressure water jet).
To increase operating time, the product should be cleaned
and sprayed after each use.
1. Clean the product with a damp cloth.
2. Lubricate the blade
(2)
with a low viscosity oil
(e. g. GARDENA spray-oil Art. 2366). Avoid contact
with the plastic parts.
5. STORAGE
To put into storage:
The product must be stored away from children.
1. Charge the battery. This increases the life of the battery.
2. Clean the product (see 4. MAINTENANCE) and slide the
protective cover
(1)
over the blade
(2)
[ Fig. S1 ].
3. Stow the product in a dry area and in a frost-free place
before the first frost arrives.
Disposal:
(in accordance with RL2012/19/EC)
The product must not be disposed of to normal
household waste. It must be disposed of in line with local
environmental regulations.
IMPORTANT!
Dispose of the product through or via your municipal
recycling collection centre.
Disposal of the battery:
Li-ion
The GARDENA battery contains lithium-ion
cells that should not be disposed of with
normal household waste at the end of its life.
IMPORTANT!
Dispose of the batteries through or via your municipal
recycling collection centre.
[ Fig. S2 ]:
1. Discharge the lithium-ion cells
8 completely.
2. Remove lithium-ion cells 8 from the product
3. Dispose of lithium-ion cells
8
properly.
3. OPERATION
DANGER! Risk of injury!
Risk of injury if the product does not stop
when you release the start button.
v
Do not bypass the safety devices or switches.
For example do not attach the starting lock-
out
6
or start button
7
to the handle. [ Fig. O1 ].
To start the Shear [ Fig. O1/O2]:
To start:
The product is fitted with a starting lock-out
6
to prevent
the product from being turned on by accident.
1. Clear the area to be cut of stones and other solid
objects.
2. Remove the protective cover
(1)
from the blade
(2)
.
3. Push the starting lock-out
6
forwards and push the
start button
7
.
The product will start.
4. Release the starting lock-out
6
.
To stop:
1. Release the start button
7
.
2. Slide the protective cover
(1)
over the blade
(2)
.
EN
16
9852-33.960.05 Short.indb 16 02.07.19 16:18