11
GB
10
GB
4. Initial Operation
1. Place water feature pump on a firm base in such a way that the
filter housing
6
is completely covered by water.
2. Plug mains plug into an AC power socket.
Warning: Pump will start immediately.
3. Use the nozzle tube regulating hole
3
to set the desired
amount of water for the Fountain (see 3. Assembly “side outlet”).
5. Storing your Fountain Pump Set
1. Before the frosty season begins, take the pump out of the
pond, clean it and store it in a frost-free place.
2. To avoid difficulties when starting up in the spring, we recom-
mend storing the pump in a frost-free location in a container
filled with water.
The mains plug must not be submerged.
The product must not be added to normal household waste.
It must be disposed of properly.
6. Cleaning
1. Take the Fountain Pump out of the water.
2. Unscrew the nozzle tube and the socket
1
.
3. Take the fountain insert out of the fountain socket
5
4. Release the catches
7
and open the filter housing
6
.
5. Remove the pump from the filter housing
6
.
6. Clean the nozzle tube and fountain insert in clean water.
7. Clean the filter housing
6
with a water jet.
8. Reassemble the Fountain Pump in the reverse order.
5
1
7
6
CAUTION! Electric shock !
Risk of injury due to mains electricity.
v
Before cleaning the pump, unplug the it from
the mains.
Cleaning the fountain and
filter housing:
Disposal:
(in accordance with
RL2002/96/EC)
The pump should be stored out of the reach of children.
Storage:
3
6
Switching the
Fountain Pump on:
7. Trouble-shooting
1. Remove the pump from the filter housing (see 6. Cleaning).
2.
500 S:
Release the catches
8
on the pump housing
9
and
remove the pump housing
9
.
1000 S:
Turn the pump housing
9
anticlockwise and pull it
vertically off the motor housing
0
(bayonet socket).
3. Pull impeller unit
A
out of the motor housing
0
and clean.
4. Push cleaned impeller unit
A
back into the motor housing
0
.
5.
500 S
: Press the pump housing
9
on to the motor housing
0
.
1000 S:
Press the pump housing
9
vertically on to the
motor housing
0
and tighten it clockwise. Make sure that the
O-ring
B
is seated correctly.
Fault Possible
cause
Remedy
No water feature operating
Mains plug not plugged in.
v
Plug in mains plug.
Impeller unit is blocked.
v
Clean pump.
Water feature insert is dirty.
v
Clean water feature insert.
and nozzle pipe.
Filter housing dirty.
v
Clean filter housing.
Open the side outlet.
v
Close the side outlet using
the regulating hole.
CAUTION!
If any other faults arise, please contact GARDENA Service.
8. Accessories
Lighting the Fountain and the bank area.
art. 7952
art. 7954
art. 7958
Start water features and lighting from
the terrace or your living room.
art. 7874
GARDENA radio control set
GARDENA Underwater lights
UL 20 / UL 35 / UL 20 S Set
Work on the electrical parts must only be carried out by
GARDENA Service Centres.
Reduced water feature
8
9
A
0
B
Cleaning the pump:
CAUTION! Electric shock!
Risk of injury due to mains electricity.
v
Before fault-finding, unplug the pump at the
mains.