19
GB
You must select the % Run-Time you wish to activate before the
watering programs can run.
The times of all stored watering programmes can be reduced cen-
trally in intervals of 10 %, from 200 % down to 10 %, without having
to change each interval programme. This is ideal if you wish to
water your garden less in the Autumn than in the Summer.
If the % Run-Time-function has been set to
00 %
% RRuunn--TTiimmee
(watering programs disabled), all the channels flash and the
Prog. Off symbol appears in the normal display.
1. Press % Run-Time key.
2. Select required percentage for the programmed watering
period with the
▲
-
▼
keys (e.g.
6600 %
% RRuunn--TTiimmee
) and confirm
with the O.K. key.
The display moves to the actual time.
Programming the watering computer is now completed, i.e. the
valves installed open / close entirely automatically and therefore
water at the programmed times. If the watering time is not equal
to 100 %, the % symbol appears in the display for the actual time.
Note : If you change the watering time percentage, your Water
Computer will still display the watering time you originally pro-
grammed for the individual watering programs.
The actual watering period is the percentage proportion of the pro-
grammed watering period. E. g. if
11
hour is set as the programmed
watering period and
5500 %
%
Run-Time, the actual watering period of
3300
minutes is displayed.
1. Simultaneously press % Run-Time key and the key for the
Channel required.
2. Select program memory location with the
▲
-
▼
keys.
All 48 programs can be selected one after the other with the
▲
-
▼
keys.
You can change an existing program stored in one of the 4 pro-
gram memory locations without having to create the program
from scratch.
The data for the watering starting time, duration, and cycle are
preset ; therefore you only need to change the specific values of
the watering program you want to change. You can transfer all
other values from
“Setting the Watering Program” by pressing
the OK key.
You can exit the programming mode prematurely at any time.
v
Press the Time key.
The display shows the current time and day of the week.
The Watering Controller is reset to the default setting and
all program data is deleted.
Programmed watering periods
1100 -- 220000 %
% RRuunn--TTiimmee
= Watering programs enabled
00 %
% RRuunn--TTiimmee
= Prog. Off = Watering programs disabled
% Run-Time-Function
Displaying the actual
watering period :
Changing an existing
watering program :
Ending the programming
mode prematurely :
Reset :
Watering programs disabled
1276-27.960.02_30.09.2004.qxd 01.10.2004 09:35 Seite 19
