Proper use / responsibility:
DANGER!
Take note that the rotating blade cylinder
could cause injuries.
v
Never place your hands or feet on
or under moving parts.
Do not use the lawnmower while people,
especially children, or animals are nearby.
The operator is liable for damages.
The safety distance between the blade cylinder
and the operator that is created by the guiding
spar is to be always maintained.
When mowing embankments and slopes,
special care must be taken:
v
Make sure you always keep a safe distance
and wear shoes with a nonslip sole.
Always cut diagonally to the slope.
Take special care when moving backwards
and when pulling the lawn mower.
Danger of stumbling!
If the cutting tools or the lawnmower run into
an obstruction and / or solid objects, the lawn
mower should be properly and thoroughly
inspected.
v
Only work when visibility is good.
Never leave the lawnmower unattended.
If your work is interrupted, store the mower
in a safe place.
Warning! Keep toddlers away when you assem-
ble the unit. Small parts can be easily swal-
lowed. There is also a risk that the polybag can
suffocate toddlers.
3. Assembly
1
5
2
6
4
3
1. Insert lower upright holder
4
into upper upright
holder
2
(already preassembled).
2. Insert upper part of upright
1
up to stop in upper upright
holder
2
.
3. Insert both lower uprights
3
up to stop from underneath
in lower upright holder
4
.
4. Insert threaded rod
5
on side with square hole right
through upright holder
2
.
5. Screw clamping nut
6
onto threaded rod
5
.
6. Insert both lower uprights
3
into upright holders
7
(pressing rods together slightly) until bolts
8
in upright
holder bearings
7
engage.
Tip:
Allow to engage first on one side, then on the other.
3
3
8
7
9
GB
