
14
GB
Connecting to power sypply :
Starting electric
cylinder lawnmower :
C
D
B
1
2
F
B
C
E
5. Operation
1. Place the connector of the extension cable
C
on the plug of the
safety starter lock
B
.
2. Draw a loop of the extension cable
C
through the cable strain
relief device
D
1
and suspend in position
2
.
This prevents inadvertent disconnection of the plug and socket
connection.
3. Insert extension cable
D
into a mains socket.
Danger of injury if the cylinder lawnmower does not switch
off automatically !
V
Do not remove or bridge safety devices fitted to the
cylinder lawnmower (e.g. by tying the starting lever
to the upper handle) !
Danger ! The cylinder does not stop immediately after
A
the motor has been switched off :
V
Never lift, tip or carry the lawnmower with the
motor running !
V
Never start on solid ground (e.g. asphalt).
V
Always maintain the safety distance between the
cylinder and the user as defined by the
guide handle.
1. Place cylinder lawnmower on flat grass surface.
2. Keep safety interlock
B
pressed down and pull starting lever
E
on the upper handle
3
.
The lawnmower starts.
3. Release safety interlock
B
.
4. Only push the mower forwards and at walking pace.
When in operation, the extension cable
C
must always be
guided in the direction you are working and to the side of
the area to be worked on. Always work away from the connec-
tion cable.
Blockage Protection :
If the blade cylinder is blocked, e. g. by a
foreign body, release starting lever immediately, disconnect plug
from mains socket and remove the blockage.
Danger of injury !
A
If the thermal response switch responds and the start-
ing handle remains in the ON position, the cylinder
mower starts again automatically after cooling down.
V
Release starting lever immediately.
Circuit Breaker :
If the electric cylinder lawnmower is over-
loaded over a longer period of time the motor may become
hot.To protect the motor from overheating the circuit breaker
switches the motor off. You can switch the mower on again after
approximately 5 -10 minutes.