16
GB
4. Assembly
All 4 wheels must always be screwed in at the same cutting
height (see 5. Operation “Setting the cutting height”).
1. Insert screw
1
through the bore in the hub cap
2
and push
the 6-sided head fully into the hub cap
2
.
Insert the short screw in the small hub cap and the large
screw in the large hub cap.
2. Press covering cap
3
into the hub cap
2
until it snaps in
place.
3. Insert screw
1
through the wheel
4
and screw the wheel
4
firmly in place by hand at the side and ensure it is securely
located.
Screw in the small wheels (13 cm diameter) at the front and the
large wheels (16 cm diameter) at the rear.
34 A easyMove
Fitting the wheels :
If a short-circuit occurs, the Accu is protected
by a safety fuse.
This fuse may not be replaced !
v
If the fuse has been destroyed, please
contact GARDENA Service.
Do not charge the Accu if it has been
operating at a relatively high temperature
or has been exposed to sunlight. Allow it
to cool down first.
Do not expose the charger to moisture.
Using a charger other than the GARDENA
charger supplied releases GARDENA from
all liability and warranty claims.
The mower may not be operated using re-
chargeable batteries.
The Accu must only be charged in a dry place.
Never expose the Accu to direct sunlight when
charging it. Only use the Accu for the Flexible
Steerable Mower.
The mower cannot be switched on with the
charging plug connected.
Protect the charging socket from dirt and
moisture.
If the battery develops a leak, remove the
safety key, put on gloves, remove the battery
and dispose of it.
Do not touch battery acid.
If acid comes in contact with the eyes, wash
out immediately with water and send for a
doctor.
3. Function
Summary of All the Operating Components :
1
Start button
2
Steering wheel lock (for mowing on a slope)
3
Buttons to open up and fold down the swivelling handle
4
/
5
Battery cover release (cover release
5
is under the safety
key)
5
Safety key
6
Wheel lock (for mowing on a slope)
7
Switch handle
8
Clamping lever for adjusting the length of the swivelling handle
9
Cutting height adjustment by unscrewing the wheels
3
1
2
4
1
2
3
4
5
6
7
8
9
