4
Lowes.com/gardentreasures
ASSEMBLY INSTRUCTIONS
1. Remove all parts from the carton and place them
on a non-abrasive surface. Insert one middle left
crossbar (B) into the end of a middle right crossbar
(C). Insert a short bolt (AA) and washer (DD) through
the middle left crossbar (B) and into the middle right
crossbar (C) for each hole. Do not tighten completely.
Repeat this procedure for the remaining middle left
crossbars (B) and middle right crossbars (C).
Repeat this procedure to connect the bottom right
crossbars (D) and bottom left crossbars (E) as well
as the top right crossbars (F) and top left crossbars
(G). Then, tighten all bolts using the hex wrench
(GG).
Hardware Used
AA
Short Bolt
x 36
DD
Washer
x 36
GG
Hex Wrench
x 1
1
B
C
C
B
AA
DD
C
B
2. Connect the middle and bottom crossbar assemblies
as shown.
2
C
C
B
D
D
E
B
C
D
E
3. Stand up the four leg posts (A), ensuring the holes in
the leg posts (A) face inside.
3
A
