9
ASSEMBLY INSTRUCTIONS
Hardware Used
6
6. Open the door on the housing assembly
(H), then turn the connection end of the
preassembled regulator to face outward.
Attach a 1 lb. LP-gas tank (sold
separately) to regulator. Then, turn the
regulator until the tank is in an upright
position. Close the door.
Caution
This appliance uses a 1 lb. cylinder only.
Only a cylinder marked “propane” can
be used.
HAND TIGHTEN ONLY.
Be careful not to cross threads when screwing
in canister.
Keep the tank vertically upright for vapor
withdrawal.
DANGER
Failure to check for leaks could cause a fire
or an explosion, which can cause death,
serious bodily injury or damage to property.
5
5.
Attach the reflector (A) to the
preassembled spacers on the emitter
assembly (C) using acorn nuts (AA).
Acorn Nut
x 3
7.75 in
3.875 in
