ASSEMBLY INSTRUCTIONS
1. Place top (A) upside down on a soft surface,
such as carpet. Attach legs (B) to top (A) using
short bolts (AA) and washers (CC). Hand
tighten only.
2. Assemble brace (C) to legs (B) using short
bolts (AA) and long bolts (BB) where shown
and washers (CC).
Check alignment of all hardware and make any
necessary corrections. Then, securely tighten
all bolts with hex wrench (DD).
Estimated Assembly Time:
20 minutes
Tools Required for Assembly (included): Hex Wrench
Hardware Used
Short Bolt
Washer
x 4
x 4
Hardware Used
Short Bolt
Washer
Hex Wrench
x 4
x 8
x 1
3
AA
1
2
AA
CC
CCB
DD
AA
AA
AA
CC
CC
AA
A
B
C
B
Lowes.com/gardentreasures
BB CC
Long Bolt
x 4
BB
A
CARE AND MAINTENANCE
Clean frame with a solution of warm water and mild soap. Dry completely. Do not use bleach
or solvents. Use a fine automotive wax to maintain gloss on non-textured finishes.
•
• The finish on furniture is formulated and baked on to make it highly resistant to repellents and
lotions. However, to avoid discoloration, clean the frame as soon as possible after exposure.
prevent mildew by washing out dirt particles that may become trapped. Shake out excess
moisture after rinsing and allow to dry thoroughly before storing.
• For best results, clean weave regularly with mild detergent and warm water. Cleaning will help
• Paint on this furniture might peel if it is not handled properly. Handle with care.
