5
.
Lay Bucket inside of Base and screw on large nut.
Tighten with Philips screwdriver.
.
For improve the stability , please fill the bucket
with Sand.
Step 3 – Attach Support Brackets to Base
.
Attach three Support Brackets loosely to Base with
three medium bolts downward through Support
Brackets into the Base.
Step 4 – Attach Post to Support Brackets
.
Install Post onto three Support Brackets.
.
Attach Post to Support Brackets using six large bolts
& six flange nuts.
.
Fully tighten all of the screws.
Step 5 – Load Cylinder Housing onto Post
.
Load Cylinder Housing onto Post.
.
Slide Cylinder Housing down.
Step 6 – Attach Reflector Studs to Screen Cover
.
Insert 3 Reflector Studs & 3 Flat Washers.
.
Tighten studs securely.
Step 7 – Attach Head Assembly to Post
.
Screw off 4 small bolts.
3 Req’d Medium Bolts
6 Req’d Large Bolts
6 Req’d Small Flange Nut
3 Req’d Reflector Studs
3 Req’d Large Flat Washers
Head Assembly
4 Req’d Small Bolts
