4
If you choose to vary from these instructions your
warranty will be impaired.
If you need advice, call us
FREE
on
0800 807 433
or email us at [email protected]
!
i
DIAGRAM 4
YOU WILL NEED:
5 x 1830mm sheets for the back
1 x 3745mm top channel
1 x 3745mm bottom channel
A
G
STEP 2:
BACK WALL
1.
Join 5
A
sheets together with 2 rivets through the overlapping ribs making
sure the ends of the sheets are flush.
2. Cap sheeting with
G
channels putting the cutouts top
and bottom same as the front wall.
3. Rivet the channels through the end ribs and
every 2nd rib between.
4. Make sure you put at least 1 rivet
per sheet up through the
underside of the channel into
the pan of the sheet.
YOU WILL NEED:
5 x 1830mm sheets
2 x 3745mm channels
2 x 1830mm ‘L’s
C
F
H
STEP 3:
ROOF
1.
Join 5
C
1830mm sheets together, same as the back.
2. Cap sheeting with
F
3745mm channels.
3. Rivet the channels at every second rib but not the corners at this stage.
4. Place the short flange of the ‘L’ on top of the rib at one end.
Make sure ends are flush with sheeting (diagram 1) and
put one rivet in the centre to hold the ‘L’. Rivet the
corners through the channels and one more
between the corner and the centre rivet.
Perform the same at the other end.
5 rivets for each ‘L’.
Put extra rivets in for high wind areas,
particularly on the underside.
GARDEN MASTER TIP
G
A
G
H
F
C
H
SCAN TO
WATCH OUR
ASSEMBLY VIDEO
HERE
F