4
If you choose to vary from these instructions your
warranty will be impaired.
If you need advice, call us
FREE
on
0800 807 433
or email us at [email protected]
!
i
DIAGRAM 4
YOU WILL NEED:
3 x 1830mm sheets for the back
2 x 2255mm channels
A
F
STEP 2:
BACK WALL
1.
Join 3
A
sheets together with 2 rivets through the overlapping ribs
making sure the ends of the sheets are flush.
2. Cap sheeting with
F
channels putting the cutouts top and bottom
same as the front wall.
3. Rivet the channels through the end ribs and every 2nd rib between.
4. Make sure you put at least 1 rivet per sheet up through the
underside of the channel into the pan of the sheet.
YOU WILL NEED:
6 x 1200mm long sheets
4 x 2255mm channels
4 x 1200mm ‘L’s
1 x 2255mm ridge beam
B
G
I
K
STEP 3:
ROOF
1.
Join 3
B
1200mm sheets together, same as the back.
2. Cap sheeting with
G
2255mm channels.
3. Rivet the channels at every second rib but not the corners at this stage.
4. Place the short flange of
I
‘L’ on top of the rib at 1 end. Make sure ends are
flush with sheeting and put 1 rivet in the centre to hold the ‘L’. Rivet the corners
through the channels and 1 more between the corner and the centre rivet.
Perform the same at the other end and next roof panel.
5. Rivet
K
ridge beam to one roof panel and rivet
through internal flange and thru the ends of the
ridge beam into ‘L’.
Put extra rivets in for high wind areas,
particularly on the underside.
GARDEN MASTER TIP
F
A
F
I
G
B
I
K
SCAN TO
WATCH OUR
ASSEMBLY VIDEO
HERE
G
