Langdale
picnic bench
2
Step 1
Step 2
Ensure that you have all of the correct parts as listed
on the front page of these instructions, including any
fixings.
Lay the table top upside down on a clean, flat surface
taking care not to damage it. Now line up one of the
table A-frames centrally on the table top as shown in
step 3.
Step 3
Step 4
Place one of the table A-frames centrally against the
fixing batten ensuring that the gap at the table edge
is the same on both sides. Now, using 2 of the
supplied coach screws and the pre drilled holes,
secure the table A-frame to the fixing batten on the
table top.
Place a cross brace in position as shown, ensuring
that it is flush with the underside of the table A-frame
and proceed to step 5. If you are building the
3ft
version
please refer to
Step 8
before proceeding with
Step 5.
