5
The distance between the bottom edge of the appliance and the floor must be at least 1.8 M.
See figure 2.
There must be a distance of at least 0.2 M between the appliance and the ceilings, roofs or
other covers. See figure 2.
There must be a distance of at least 0.5 M at each side between the appliance and walls or
the like. See figure 2.
Recommended degree to mounting surface is 45°. See figure 3.
the rotation angle is 60° . See figure 5.
Pay attention that, the installation of the appliance must not add excessive wind load.
Fix the mounting bracket on the wall first. Ensure that the place to be installed is secure and
firm. Or connect the appliance to the stand.
Adjust the desired angle of radiation and fest screw all screws. Check regularly the screw's
connection. Mechanical bearing pressure and oscillation due to wind or rain could lead to
loose.
Plug in the power source and operate the remote control. Then observe, whether during the
first 10
‐
15 minutes the appliance works trouble
‐
free.
If you do not use,please remove battery socket
screws’ connection. Mechanical bearing pressure and oscillation due to wind or rain could
lead to loose.
Plug in the power source and operate the remote control. Then observe, whether during the
first 10
‐
15 minutes the appliance works trouble
‐
free.
If you do not use,please remove battery socket
6
Figure1: Mounting bracket (wall bracket) and
anchor dowels provided. Connection from the wall
to the infrared heater.
Figure2: Min. distance to floor, ceiling and wall.
Figure3: Tilt angle.
Figure 4: Max.remote distance
Figure5: Rotation angle
