3
Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Do not
route cord under furniture or appliances. Arrange away from areas where it may be a trip hazard.
DO not try to repair the appliance by your
‐
self.
DO not insert or allow foreign objects to enter any part of this heater as this may cause electric
shock or fire or damage the heater.
To prevent fire risk, do not block air intakes or exhaust in any manner.
A minimum distance of 1M between the appliance and flammable materials must always be
maintained.
Do not use it in the areas where gasoline paint or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other use not recommended by the
manufacturer and may cause fire electric shock or injury.
Always plug heaters directly into a wall outlet /receptacle. Never use with an extension lead.
Never coil or tie any spare electrical cable when heater is in use.
Do not try to repair the appliance by yourself. Please contact the service agent or a suitably
qualified electrician for maintenance.
Remove the plug from the power outlet and wait until the appliance is sufficiently cooled before
cleaning.
This heater is not intended for use in bathrooms laundry areas and similar indoor locations. Never
locate heater where it may fall water.
Save These Instructions
Specifications
Specification
LDHR018
‐
200EKY
‐
M
Voltage (V)
220
‐
240V
～
Power consumption (W)
2000W
Infrared receiving Angle
60°±5°
The control distance(M)
6
Battery type
AAA size1.5V ,2 pieces
Rotation angle
60°±5°
4
Remote Control Instructions
Button
Feature
A
To turn oscillation on, use the remote control, press
ON (A).
B
To turn oscillation off, use the remote control, press
ON (A).
C
The oscillation can be turned off at any time and the
heater head will stay in the selected position.
Notice
：
Use 2 pieces AAA size1.5V batteries in the remote control.Remove the battery when not use for long
time,thus the lifespan of remote control can be extended.
Choose the same specification battery when replacing the battery inside,otherwise it may cause
remote control not work ,thereby affect the normal use of the heater.
Please contact service agent for further help if you need the function.
The remote control function may be out of work if there is a barrier between the remote control and
heater .
Replacing the batteries duly so as not to affect the normal use of heater and remote control.
Operation Instruction
Remove all package material (including anti
‐
vibration object of the lamp) and check the
appliance, supply cord and the plug for signs of damage.
Pay attention to the mounting place and all mounting material(dowels, screws). Ensure they
are suitable and stable enough for mounting and lastingly holding of the appliance.
Before mounting, the minimum safe mounting distances and tilt angles shown in the figures
must be strictly followed.
