TR-RT LED lighting controllers - User Manual
View some measured voltages and the actual output current.
Set the output mode: continuous, pulsed, or switched.
Set the pulse parameters.
10.2.1 triniti status
When the TR-RT detects connection to a
triniti
enabled light, information
about the light and its set up parameters are sent back to the controller.
The manufacturer and model of the light is identified along with its serial
number, and you can create your own name for the light.
Dynamic factors concerning the light are fed back to the TR-RT such as its
temperature, usage and age. This information is used by the TR-RT to
adjust the output current to ensure the light provides consistent levels of
illumination throughout its lifetime.
Information about the
triniti
chip is also returned, such as serial number
and software version.
10.3
General setup page
The General Setup page allows you to set up or clear the webpage's
password and set up the internal trigger. You can also enter any Ethernet
command from
Section 11, Command configuration
—
29
—
