4
3
Safety - English
3.1.1
PP860 – Safety
Please read this before using the PP860 family of products. If in doubt, contact
your distributor or Gardasoft Vision.
3.1.2
Heat
The PP860 can get very hot. It should be positioned where personnel cannot
accidentally touch it and away from flammable materials.
Do not exceed the power ratings given in the manual. Note that at the
maximum ratings the case temperature can reach 80
o
C.
If the output load is short circuited then the heat dissipated within the unit will
greatly increase, resulting in a further rise in temperature.
3.1.3
Electrical
The user must ensure that the potential difference between any combination of
applied signals does not exceed the supply voltage. WARNING: Higher
voltages may cause a danger to personal health.
The PP860 does not have complete tracking isolation of inputs and outputs.
Transients caused by inductive loads must be suppressed external to the PP860.
3.1.4
General
The PP860 must not be used in an application where its failure could cause a
danger to personal health or damage to other equipment.
