20
PP600 is ready
Use UP or
DOWN to select
"CON", "SE 1",
"SE 2" or
"SE12". See text.
The PP600 sets the
output current.
Use UP or DOWN to select
which output channel to set up -
"CH1" or "CH2".
Press and hold RANGE
for one second
Press SELECT
Select "0" for amps or "-3" for milliamps. Then
press SELECT to set the output current. The
RANGE button changes which digit is altered.
Press SELECT
Wait one second
Press SELECT
Wait one second
Press SELECT
Press SELECT
Press SELECT
Wait one second
Use UP or DOWN and RANGE
to set the maximum current rating
of the LED unit. See text.
Note that for "CON" mode there is one current to be
set, for "SE 1" and "SE 2" there are two currents to
be set and for "SE12" there are four current to be
set.
Press SELECT
