GARCARE GPCS06, Инструкция по эксплуатации

Страница: 10 / 15

10
Safety tips for electric pole saw

Keep all parts of the body away from the saw chain when the chain saw is
operating. Before you start the chain saw, make sure the saw chain is not
contacting anything.
A moment of inattention while operating chain saws may
cause entanglement of your clothing or body with the saw chain.

Always hold the chain saw with your right hand on the rear handle and your
left hand on the front handle.
Holding the chain saw with a reversed hand
configuration increases the risk of personal injury and should never be done.

Hold the power tool by insulated gripping surfaces only, because the cutter
blade may contact hidden wiring or its own cord.
Cutter blades contacting a
"live" wire may make exposed metal parts of the power tool "live" and could give the
operator an electric shock.

Wear safety glasses and hearing protection. Further protective equipment for
head, hands, legs and feet is recommended.
Adequate protective clothing will
reduce personal injury by flying debris or accidental contact with the saw chain.

Do not operate a chain saw in a tree. Operation of a chain saw while up in a tree
may result in a personal injury.

Always keep proper footing and operate the chain saw only when standing on
fixed, secure and level surface.
Slippery or unstable surfaces such as ladders may
cause a loss of balance or control of the chain saw.

When cutting a limb that is under tension be alert for spring back. When the
tension in the wood fibres is released the spring loaded limb may strike the operator
and/or throw the chain saw out of control.

Use extreme caution when cutting brush and saplings. The slender material
may catch the saw chain and be whipped toward you or pull you off balance.

Carry the chain saw by the front handle with the chain saw switched off and
away from your body. When transporting or storing the chain saw always fit
the guide bar cover.
Proper handling of the chain saw will reduce the likelihood of
accidental contact with the moving saw chain.

Follow instructions for lubricating, chain tensioning and changing
accessories.
Improperly tensioned or lubricated chain may either break or increase
the chance for kickback.

Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are
slippery causing loss of control.

Cut wood only. Do not use chain saw for purposes not intended. For example:
do not use chain saw for cutting plastic, masonry or non-wood building
materials.
Use of the chain saw for operations different than intended could result in
a hazardous situation.
Purpose for using of the electric hedge trimmer
The device is intended for infrequent use by homeowners and for such general
applications as clearing, pruning, etc. Any other usage, which do not declared in this