37
TZ FIBER 540E / 630E / Conveyor-E
Via Leonardo da Vinci, 32/B
36034 Malo (VI) Italia
Operation and maintenance manual
Rev. 01/18-GB
SECTION 1
Machine description and characteristics
1.1 GENERAL INFORMATION
This manual contains information considered nec-
essary for the knowledge, good use and routine
maintenance of the «TZ FIBER 540E / 630E /
Conveyor» model Disc Excavator, which will be
referred to hence forth as the machine, produced
by the GARBIN GROUP Unipersonale Srl, Malo
(Vicenza) Italy, hereinafter also known as the man-
ufacturer.
That written does not constitute a complete de-
scription of the various working parts nor does it
offer a detailed presentation with regard to its op-
eration, the user will however find everything nec-
essary for its safe use and for the proper mainte-
nance of the machine.
WARNING
This manual is an integral part of the machine
and should be stored for easy and immediate
reference.
1.2 WARRANTY
The Manufacturer guarantees its products as be-
ing new from the factory for a period of 12 (twelve)
months from the date of delivery. Please verify,
upon receipt, that the machine is undamaged and
complete. Any complaints must be submitted in
writing within 8 (eight) days of receipt of the ma-
chine. The warranty is will only be valid for the free
repair or replacement of those parts, which after
careful examination by the manufacturer’s techni-
cal office, appear to be defective (with the exclu-
sion of tools and lubricants).
The replacement or repair of parts in warranty will
not in any case extend the terms thereof. The buy-
er can nevertheless assert his rights only if he has
complied with the conditions relating to the provi-
sion of the warranty, as referred to in the supply
contract.
1.2.1 EXCLUSION FROM WARRANTY
The warranty is void (in addition to that indicated
in the supply contract):
- If the damage occurs as a result of an error
caused by the operator.
- If the damage was due to poor maintenance.
- If, damage is caused as a result of repairs per-
formed by the user himself without the prior con-
sent of the manufacturer or due to the assembly
of non-original parts, or if the machine should be
subject to variation and that damage can be at-
tributed to these variations.
- If instructions from this manual have not been
followed.
Damage caused by neglect, abuse, misuse and
improper use of the machine are also excluded
from the guarantee.
WARNING
Removal of safety devices, of which the ma-
chine is equipped, will void the warranty auto-
matically together with the responsibilities of
the manufacturer.
Returned goods, even under warranty, must be
sent back carriage paid.
1.3 IDENTIFICATION
Each machine is equipped with an identification
plate (1 Fig. 1), which shows:
- The Manufacturer’s name and address;
- «EC markings»;
- A) Denomination: Excavator disc;
- B) Chassis number*;
IT IS STRICTLY FORBIDDEN TO USE THE MACHINE AND OTHER RELATED EQUIP-
MENT BEFORE HAVING READ AND UNDERSTOOD THIS MANUAL.
THE GARBIN GROUP UNIPERSONALE SRL DISCLAIMS ANY AND ALL LIABILITY FOR
DAMAGES DUE TO NEGLIGENCE AND FAILURE TO COMPLY WITH THE INSTRUC-
TIONS IN THIS MANUAL.
