GARANT XCONTROL, Руководство пользователя

Страница: 52 / 292

de
bg
da
en
fi
fr
it
hr
lt
nl
no
pl
pt
ro
sv
sk
sl
es
cs
hu
GARANT XControl
L_LENGTH The probe cycle L_LENGTH is for
measuring the tool length of the
tool in the spindle. The tool must
be positioned centrally in the
tool axis with a distance of ap-
prox. 5 mm to the contact point
above the XControl. The two
other axes are not travelled in
the probing process. With cycle L_LENGTH, it is only
possible to measure the tool
length at the tip. L_LENGTH(LENGTH MEASURE-
MENT; FEED RATE)
Example
L_LENGTH Tool length is measured, measured value is in parameter R95.
L_LENGTH(0.2) Tool length is measured, measured value is in parameter R95. Probing speed is 1000 mm/min.
L_LENGTH(1) Tool length is measured and overwritten in the tool memory.
L_LENGTH(1.3) Tool length is measured and overwritten in the tool memory. The probing speed is 1500 mm/min.
For the specified variables, the values from the following table can be used.
Variable Value Meaning
LENGTH MEASUREMENT 0 Tool length is measured and can be
checked in parameter R95.
1 Tool length is measured and overwrit-
ten in the tool memory.
FEED RATE 0 - 3 Probing feed rate in mm/min
Back to Siemens automated operation [
}
Page 50]
7.3.5. Auxiliary cycle L_START(1)
Probe cycle Function Note Program code
L_START(1) XControl switches to standby
mode after 10 minutes without
measurement. Reactivation of
wireless connection is automatic
upon call-up of a probe cycle,
but takes approx. 15 seconds.
Auxiliary cycle L_START(1) can be
used to manually reactivate the
wireless connection, in order to
reduce non-productive times. L_START(1)
Example
L_START(1) Call-up of auxiliary cycle. Start of reactivation.
⁝ Tool positioning 5 mm above the XControl
L_BREAK Call-up of the probe cycle (breakage monitoring)
Back to Siemens automated operation [ } Page 50]
7.3.6. Auxiliary cycle L_RESET(1)
Probe cycle Function Note Program code
L_RESET(1) After 100 probe processes, the
wireless connection is deactiv-
ated. The reactivation of the
wireless connection is automatic
upon call-up of a probe cycle and
takes 15 seconds. Through call-
up of the auxiliary cycle, the L_RESET(1)
52