GARANT Workbench assembies, Руководство пользователя

Страница: 32 / 112

32
DE
EN
FR
IT
ES
4. Installation
The worktop is not pre-drilled for the installation of workbench assemblies.
▶
To attach the workbench assemblies to a worktop, the required bores
must be drilled into the worktop.
Only use the screws provided.
Workbench assemblies must be secured against tipping.
Workstation delivery condition:
„
The workbench assembly of the workstation is delivered pre-assembled
if the total height does not exceed 2.25 m.
„
The media track is not connected to the lifting unit when delivered.
„
The laterally fixed LED lighting unit and shelf with lighting are shipped
loose due to risk of damage during transportation.
4.1 Support columns / support columns for mounting
(92 3000, 93 8000)
▶
Attach the support columns to the worktop using the screws provided
according to bore pattern.
20 mm
28 mm
60 mm
20 – 25 mm
Hole diameter 5 mm in bamboo, beech and marine ply.
Hole diameter 3 mm in Eterlux and Eluplan.
Screw-fasten the support columns with the perforated tool panel, place
on the work surface and centre. Distance of the bore from the edge of the
worktop can deviate due to production tolerances.