GarageAce ET30 Скачать руководство пользователя страница 6

6

2. PRODUCT FEATURES

1. Easy to use. Just press the remote control button or the O/S/D button on the motor to open, stop or close

the roller shutter.

2. Safe and reliable remote control system featuring rolling code, low coincident code rate.

3. Electronic travel limit switch, easy to operate, stable and reliable.

4. ISS (intelligent safety obstruction system). When performing a close cycle the door will automatically

reverse if it hit an obstacle or is restricted in some manner. The door will also stop if it is restricted when

opening.

5. Up to 20 different transmitters can be stored in the opener’s memory.

6. Energy-efficient LED light. The light will automatically on when operating and automatically off 3 minutes

later after finish operating.

7. Back up battery terminal available. (Back up battery optional)

8. Auto close mode available. The door will be closed automatically 1 minute after it is fully opened in default

auto close setting.

NOTE: It is compulsory to install a photo electric beam if auto close mode is selected, otherwise

the door may cause personal injury or damage to property. Auto close time is adjustable.

9. Photo beam terminal available.

10. Simple and reliable clutch. Pull down the manual release lever, the door can be manually operated. Push

up the manual release lever, the door will return to auto mode again.

Содержание ET30



















Отзывы: