5
Connect the garage door operator to a properly earthed general purpose 240V mains power outlet installed
by a qualified electrical contractor. The outlet (and operator) must be positioned so that it is easily accessible.
Disconnect the power cord from mains power before making any repairs or removing covers. Only
experienced service person can remove covers from garage door operator.
When using auto close mode, a photo electric beam must be fitted correctly and tested for operation at
regular intervals. Extreme caution is recommended when using auto close mode. All safety rules must be
followed.
In order for the garage door opener to sense an object obstructing under the door way, some force must be
exerted on the object. As a result the object, door and/or person may suffer damage or injury.
If the circuit is damaged, it must be repaired by a qualified person.
Make sure that the door is fully open before driving in or out the garage and fully closed before leaving the
driveway.
Make sure that remote controls are kept out of reach of children.
