DUAL LASER PARKING GUIDE - ASSEMBLY INSTRUCTIONS
OPERATION: THE MOTION SENSOR TURNS ON THE LASER WHEN A VEHICLE ENTERS THE GARAGE AND
WILL PROJECT A "DOT" ACROSS THE SURFACE OF THE VEHICLE AS YOU DRIVE FORWARD. WHEN IT
REACHES THE LOCATION YOU ORIGINALLY SELECTED (ie. DASHBOARD), YOU ARE IN CORRECT PARKING
LOCATION.
IT MIGHT OCCUR TO YOU THE GUIDE IS PERMANENTLY ON. THIS IS NOT THE CASE. THE MOTION
SENSOR DETECTS ANY MOVEMENT (INCLUDING YOU) AND WILL CONTINUOUSLY RESET TO BE
"ON" FOR 1 MINUTE EVERYTIME IT DETECTS MOVEMENT. IF YOU WANT TO CHECK ITS "ON/OFF"
CYCLE, YOU HAVE TO BE IN A LOCATION WHERE IT WON'T "SEE" YOU FOR AT LEAST
1 MINUTE.
THE GUIDE IS A CLASS IIIA LASER PRODUCT. THIS IS THE SAME RATING AS A SUPER MARKET
SCANNER AND WILL NOT HARM YOU OR YOUR VEHICLE. HOWEVER, COMMON SENSE SHOULD
TELL YOU, "IT IS NOT A TOY AND YOU SHOULD NOT LOOK DIRECTLY INTO THE BEAM".
AN ALTERNATIVE MOUNTING METHOD WOULD BE TO USE THE GARAGETEK CEILING POWERTRAK. THIS
WOULD BE THE RECOMMENDED METHOD, AS IT IS SO EASY TO MAKE ANY ADJUSTMENTS NEEDED.
EMAIL THE STORE AND DETAILED INSTRUCTIONS / FREE HARDWARE WILL BE SENT TO YOU.
PG 4 QUESTIONS ???? CALL 1-866 664 2724 REV 1, 12/11
